Chugger Brew pump, inline, stainless steel head
This Chugger Stainless Steel inline pump allows you to move hot wort with ease. The durable housing means you never have to worry about cracking the pump head when tightening your fittings. All the materials are FDA food compliant and the components are UL Recognized. This is the inline version where the inlet and outlet are 180° opposed to each other. This pump can handle liquids up to 250°F, the inlet and outlet are both 1/2" male NPT.
Please be aware that you should not attempt to limit the flow on the INPUT side of the pump, only on the OUTLET side of the pump. Serious damage can occur if the input side it restricted. Also, this is NOT a self priming pump. It needs to be located lower than the level of the fluid it is pumping, and allowed to fill with liquid before starting.
Inlet 1/2″ MPT & Outlet 1/2″ MPT
- Max Flow: 7 GPM 26.5 LPM
- Max Head: 18.6 FT 4.1 M
- Power: 1/20 HP (.04 HP) .029 KW
- Electrical: 115V 50/60HZ
- Motor Only: 1.7 Amps
- Motor and Pump: 1.9 Amps
- Can handle liquids of 250° F
- Materials are FDA Food Compliant